Auto-gard T is a urethane system with an integrally textured top coat. It provides a very consistent, well textured finish with good anti-slip characteristics. The integrally textured top coat reduces the need for silica aggregates thus eliminating health concerns with silicosis. This system is ideal for high production applications
Contact Us Today
Typically the coating needs to cure 72 hours before opening to vehicular traffic. In coolertemperature this time may extend out as much as 24-36 hours.
It is best to water cure concrete or use a sodium silicate curing compound. The use ofacrylic or other “film forming” compounds will create bond issues and must be removed.
The coating should be applied at temperatures that are 40°F/4°C and rising during application.
The coating should not be applied to deck surfaces that are =/> 100°F/38°C.
Safety Data Sheets (SDS)