Auto-Gard F

Two component, urethane/epoxy hybrid system with optional topcoats. Coarse aggregate designed for steep ramps or other high traction applications.

Auto-gard F is a high solids, low odor hybrid system ideal for steep ramps applications where increased texture is needed to guard against slip/skid of vehicles. It is ideal for all service levels of traffic from multifamily to hospital and retail.

Contact Us Today


How long does Auto-Gard F need to cure before opening to vehicular traffic?

Typically the coating needs to cure 24 hours before opening to vehicular traffic. In cooler temperatures this time may as may be 24-36 hours.

What type concrete curing compounds can be used with Auto-Gard F?

It is best to water cure concrete or use a sodium silicate curing compound. The use of acrylic or other “film forming” compounds will create bond issues and must be removed.

What is the minimum temperature at which Auto-Gard F can be applied?

The coating should be applied at temperatures that are 40°F and rising during application.

What is the maximum concrete temperature that Auto-Gard F can be applied?

The coating should not be applied to deck surfaces that are =/> 100°F.